5130 Contact Service

5130 Contact Service

5130 successfully contact service repair


first step make full back up, and save,

secondly repair SD, sometime you may get error, do not worry,
go to the PMSolution for: "SECURITY_TEST failed!" and "warning: SD authorized but verify failed!"

If after repair SD and/or Simlock (Super Dongle RPL and Simlock RPL upload) you get "SECURITY_TEST failed!" and/or "warning: SD authorized but verify failed!".
This is comming usually because some PM fields and/or RPL sections are missing from your phone (e.g. DRM keys, CCC, ...).

Solution 1 (easy way, maybe not work all time, depends how phone was damaged):
- write full PM from SAME phone model (product number) WITHOUT fields 1, 308, 309 (and WITHOUT field 120 for SL20 based phones)
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

if still have problems, use Solution 2:

- backup RPL (NPC, CCC, HWC, ...), will call this ORIGINAL RPL
- backup RPL from another working phone (same model) with SAME product code
- edit this good RPL from another phone and remove NPC section (all lines who start with NPC_DATA_1 ... NPC_DATA_xx), will call this edited file CLONE RPL
- backup full PM from another working phone (same model) with SAME product code, will call this file CLONE PM
- full erase flash chip (use erase file regarding flash chip size)
- flash phone (CMT, APE, ...)
- upload CLONE RPL
- upload ORIGINAL RPL
- write full CLONE PM without fields 1,120,308,309
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

option, activate super dongle,